During garage work at weekend, noticed that Sensor at Position 2 had wires damaged. cleaned the sensor as well.

This evening, a very kind member has put on vauxcom and some unusual reading came.

Sensor at position 1 was reading very high approx 4.86

Sensor at position 2 was approx 0.86 but was showing INACTIVE some time.

There was only one error code that Sensor 2 was not working properly, this was confusing as reading of Sensor 1 was too high.

Wodering any one come with this before or has spare lambada sensor that I can borrow to test.

Many thanks for reading!