Has anyone got front Parking sensors factory or not,
Any pics / measurements greatly appreciated .
Cheers .
Has anyone got front Parking sensors factory or not,
Any pics / measurements greatly appreciated .
Cheers .
Full set OEM here.
What measurements are you after - positions ?
If you take the bumpers off you'll find the drilling points quite clearly moulded in.
why would you want front parking sensors . surely you can see the front bonnet ?. your do you park with your eyes shut . lol
I fitted front parking sensors on mine, as said above , if you remove the front bumper the marks are there for positions..
Sent from my iPhone using Tapatalk
If you zoom in on this picture of mine , you can see the positions of the sensors, but they are marked on the inside of the bumper.. Hth...
Sent from my iPhone using Tapatalk
Was hoping to fit them without taking bumper off so was after the measurements . Cheers
TBH after doing the back with the bumper still in place it will take you longer to measure and mark up than it will to just remove the front bumper.
Locations - from the outside I'm guessing you'd need someone with the exact same front bumper as you have. Given how easy it is to remove the bumper, it's really not worth risking mis-measurement.
Activation - with the OEM fit system both front and rear are active at the same time, initiated by selecting reverse or by overide switch below the hazard lights switch. System auto cancels when moving forward over 15mph.
I retrofitted factory front parking sensors and had the wiring behind the swtch. Andy.l kindly fitted the wiring to the rec/module then had a quick tech2 session to sort them out. I already had the factory rear sensors.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks