rear spoiler fitment

**Beavis** · 24th July 2005, 21:44

hello all i've just bought an 03 2.2dti sri and it has a rear boot spoiler (or so they call it!!)its the small about an inch wide bit of plastic stuck on the boot lid,is it possible to fit a irmscher i3401401 as well or does the old one have to come off,
any help would be great

**big phil** · 24th July 2005, 23:05

I'm sure it stays on matey !!

**Andy** · 24th July 2005, 23:07

No need to remove.... all the rear spoilers fit on, even if you keep the lip spoiler

**big phil** · 24th July 2005, 23:09

Originally Posted by Andy

No need to remove.... all the rear spoilers fit on, even if you keep the lip spoiler

Is this the new beast andy ?

**Andy** · 24th July 2005, 23:20

no no no.... mines totally standard (bar chrome mirrors and irmy grill). That one belongs to the MD of Irmscher UK.

Its bamboo green too, mine digital green, almost the same colour as the forum green

**Beavis** · 24th July 2005, 23:37

thanks chaps any one know where to get a cheap spoiler model i 3401401
thanks

**AJA** · 25th July 2005, 07:52

Send a PM to either 'ANDYVEC' or 'Leeds Vectra' mate, they'll sort you out at a good price.

**cyb** · 25th July 2005, 09:48

As andy says keep the lip spoiler on as well, I have and the two go very well together.

**Ste** · 25th July 2005, 10:02

Some spoiler need the lip spoiler in place to fit properly

**AJA** · 25th July 2005, 10:32

Vx actually attempted to take off my Lip Spoiler when they were fitting my Rear Wing Spoiler, but they told me that it was riveted on.

Some are riveted and some are bonded, apparently.