rear parking sensors

[ensign2006]

Just bought the electromagnetic rear bumper system ! Any tips before I start? Got diagram for bumper removal but any tips from anybody out there who has this type fitted would be very gratefully recieved! Forgot to say car is 04 Signum 2.2 direct design

[spennny]

Just bought the electromagnetic rear bumper system ! Any tips before I start? Got diagram for bumper removal but any tips from anybody out there who has this type fitted would be very gratefully recieved! Forgot to say car is 04 Signum 2.2 direct design

Is it the 4 sensors, or one large sensor ? Will that work if you reverse against say a fence ??

[Guyver1]

If its the long metallic strip that doesnt require drilling, im interested in fitting one

[ensign2006]

Yes it is the long metal type,goin to see my mechanic mate tomorrow cos I think it will be a two-handed job to take the bumper off and replace it

[Guyver1]

Yes it is the long metal type,goin to see my mechanic mate tomorrow cos I think it will be a two-handed job to take the bumper off and replace it

is it a vectra or Signum, if i can find out how to remove my bumper (Signum) ill fit one

[67688c]

I thought the whole point of those electromagnetic type sensors was to avoid having to remove the bumper to drill any holes, as it usually just a strip that sticks on inside the bumper or sometimes behind the number plate. I dont think you need to remove the bumper matey.... Do you?

[Guyver1]

I thought the whole point of those electromagnetic type sensors was to avoid having to remove the bumper to drill any holes, as it usually just a strip that sticks on inside the bumper or sometimes behind the number plate. I dont think you need to remove the bumper matey.... Do you?

Bumper has to be removed as you need a bit of room to put the strip in the right location

[steve1975l]

I have heard they are not very good. Get the cisco ones from Ebay, at <£20. What colour is your car?

[vxvirgin]

Or these ones if you want a display too. Was going to say they were even cheaper - they were £10 when I got mine but seem to have crept up.

http://www.amazon.co.uk/BA118-Sensor...1265310&sr=8-1

[Guyver1]

Even better, one that requires NO drilling and NO bumper removal

http://cgi.ebay.co.uk/Veba-AVRSNP-Nu...1%7C240%3A1318