Thanks: 0
Likes: 0
Signum front axle load ?
I was just on the phone to Roadrunner chatting about some Eibach springs. They need to know which front axle load weight rating i have.
Is it either 1060Kg or 1130Kg.
She has the 1.9 signum with both axle weights. Which i said is a bit strange
Anyway could somebody check it out for me so i can order them.
Nice lady on the phone said somebody off here ordered a set the other day. Who is it????
I think she's getting mixed up. On the plate on the driver's side B pillar it has two weights, amongst other things. One saying '1 - xxxx' and the other saying '2 - xxxx' where xxxx is the axle weight. #1 is the front, #2 is the rear. I know you aren't with your car, but its the #1 figure that you need somebody to check that has the same engine. I believe it's the same front axle weight on a Signum and Vectra.Originally Posted by shan
She has the 1.9 signum with both axle weights. Which i said is a bit strange
Your best bet is to wait till your hangover's gone,you get home and open your driver's door and look on the plate on the door pillar!!! The 3.2 has 3 different options and it's all about the strength of the springs.
Have a good flight mate!
She says in here catalouge it show's that the part no. 10-65-011-01-22 and 10-65-011-02-22 are also for the signum 1.9 " not shown on the website or this list" but as you can see they are different front axle weights.
Same for the vectra bus.
Thats why i said to her thats strangeas it's the same engine and the same car so it should be only one.
Vectra C1.6, 1.804.02 -965 kg980 kg10-65-007-05-22£138.00
Vectra C1.8, 2.0 Turbo, 2.2, 3.2, 1.9 CDTi, 2.2 Dti04.02 -1060 kg980 kg10-65-007-01-22£138.00
Vectra C2.0 Turbo, 3.2, 1.9 CDTi, 2.0 DTi, 2.2 DTi04.02 -1130 kg980 kg10-65-007-02-22£138.00
Vectra C3.0 DTI05.03 -1230 kg980 kg10-65-007-07-22£138.00
Vectra C Estate1.8, 2.0 Turbo, 2.2, 3.2, 1.9 CDTi, 2.2 Dti04.02 -1060 kg1140 kg10-65-011-01-22£138.00
vectra C Estate2.0 Turbo, 3.2, 1.9 CDTi, 2.0 DTi, 2.2 DTi04.02 -1130 kg1140 kg10-65-011-02-22£138.00
Vectra C Estate3.0 l DTI04.02 -1230 kg1140 kg10-65-011-03-22£138.00
Signum1.8, 2.0 Turbo, 2.2, 3.2, 2.2 DTi03.03 -1060 kg1140 kg10-65-011-01-22£138.00 aLSO 1.9CDTI
Signum2.0 Turbo, 3.2, 2.0 DTI, 2.2 DTi03.03 -1130 kg1140 kg10-65-011-02-22£138.00 aLSO 1.9 CDTI
Signum3.0 l DTI05.03 -1230 kg1140 kg10-65-011-03-22£138.00
Last edited by shan; 24th January 2008 at 18:32.
It's a bit difficult to decipher all that stuff, but extra options can often add more weight to the FAW and tip it into the next range of a manufacturer's springs - hence why they have the same engine listed under two different parts and weights. The different listing for the Signum and estate will be due to the different rear axle weights of those to the hatch. The fronts are the basically same for all the models with the same engine.
The only way to know for sure what you need is to get the weight from your car, as per my post above. If you can't wait until you get back to order them, can your good lady not get the number from the plate?
Not a problem I'm just being impatient. I'll look at the car tomorrow when I'm home and make sure. I was just going to order them so I'd be in Saturday to take them off the courier.
Cheers guys
Well i'm even more confused now. I have 1-1120 and 2-1060. On the door pillar.
I presume i'm needing the kit. Signum1.8, 2.0 Turbo, 2.2, 3.2, 2.2 DTi03.03 -1060 kg1140 kg10-65-011-01-22
I dont know why these figure's don't match.
ME but I have to wait 2 weeks as none in stock.......
1 will be your front axle 2 the rear mate
On the roadrunner site it show's 3 setup's for signum.
Front axle load.-- Rear axle load.
1060 ----------- 1140
1130 ----------- 1140
1230 ----------- 1140
This is whats getting me confused. as before mine show's
1-1120 and 2-1060 so i thought the first one listed. and no.1 is rear and no. 2 is front.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks