new head unit

**keggy77** · 13th February 2013, 16:12

hi all in the next few weeks going to be changing the vauxhall cd30 head unit for a kenwood DPX404U one would any body know if the Auto-Leads steering wheel stalk control adaptor kit pc99-x45
is the right one for my car a vectra c club 55 plate (05) if not can someone tell me what is the right kit to get cheers kev !

**R13hard** · 13th February 2013, 16:34

PC99-X45 is NOT the right adapter for your car i'm afraid.

The pc99-x45 is for the half canbus models. Car with the cdr2005 or ccr2006 stereo fitted.

As you have the cd30 stereo then you will need a different autoleads adapter as your car is full canbus, unfortunately I don't know which one that would be.

I hope this is of some help, Sorry i don't have a complete answer for you.

**R13hard** · 13th February 2013, 16:39

This looks more like what you would need: CTSVX002

http://www.caraudiodirect.co.uk/ctsv...l-adaptor.html

**keggy77** · 13th February 2013, 20:38

cheers mate kev !

Originally Posted by R13hard

This looks more like what you would need: CTSVX002

http://www.caraudiodirect.co.uk/ctsv...l-adaptor.html

**keggy77** · 13th February 2013, 21:00

will i be ok just to fit my kenwood with the CTSVX002 patch lead or will i need any other leads . thanks kev!

**R13hard** · 13th February 2013, 21:08

you will need a "patch lead" too

This is the lead that goes from the CTSVX002 to the stereo

Be aware that there are 2 different versions for the kenwood dependant on your model