Info needed , heated seats , retro fit !

[biffbangpow]

so
following on from the poll , half leather to leather
as i have got half leather , which is staying , i would like to fit heater pads to these seats

so far i ,ve got , a pair of omega c heated cloth seats for the pads
and the switches in the dash ,

how can i tell if my car is pre- wired for heated seats ?

or

how do i retro fit the looms , to get heat to the pads

i,m on the trail of some looms !


any thoughts ,ta

[MrDerv]

Pull the switch blanks out of the dash, if there's a connector behind them, then it's pre-wired

[MrDerv]

Oh, and they'll need activating, give me a shout if you need a hand with that

[John LE]

If there is wiring behind the plug then that means there is wiring behind the plug. It's normally the floor loom that's missing (as with mine)

And they don't need activated via tech2

[biffbangpow]

If there is wiring behind the plug then that means there is wiring behind the plug. It's normally the floor loom that's missing (as with mine)

And they don't need activated via tech2

can you tell me how you retro fitted these looms , ta
any pics ?

[John LE]

There are a few threads on here mate with regards to the wiring. Worth checking the plug under your seat to see if you have the pins first......if you have an earlier car then the wiring might be in place.

I've not gotten round to fitting my wiring yet

[Ian-Highlander]

Oh, and they'll need activating, give me a shout if you need a hand with that

Front's don't need activating, only the rears do.

And having the wiring behind the switches doesn't guarantee the wiring is under the seats.

Edit: yeah what John said

[MrDerv]

Oh well, just the hard work putting in the wiring in then! Sounds fun lol

[Big Red]

I have elite leather seats mate but none of the wiring is there want them sorted too but looks like im out of luck for now lol