Cleaning the car today my drivers side door mirror decided it didn't want to be their anymore does anyone know if it can be glued back or do I need a new part
Cleaning the car today my drivers side door mirror decided it didn't want to be their anymore does anyone know if it can be glued back or do I need a new part
Quite common on Vectra i'm afraid, however, if the plastic backing is still in the mirror, then yes just glue it back in. I understand some of our members have used sillicone to stick the glass back in.
Bit of superglue an it'll be reet
Did that to my passenger mirror last year an still ok.
Failing that, Halfords sell stick on ones
Decent double sided sticky tape should work too.
Impact Adhesive works very well..
Get a tube of black silicon from Screwfix stays flexible and waterproof - only a couple of quid - best way to stick the mirror back in and you will have loads left for when the other side falls out - which won't be long
common fault as mentioned above. always seems to happen when you have just washed the car
it seems that when using your heated mirrors through the winter. seems to dry the glue
it happened to me aswell i used bostik glue its been ok for the last 3 years
there have been a lot of threads on here about the mirrors falling off
Mine fell off after a while with superglue. 'No more nails' and all is well.
I stuck mine back in with decorators caulk...it was all I had to hand at the time and its worked perfectly. Not fallen out yet anyway!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks