-
5th January 2012, 20:23
#1
On a Sabbatical
-
5th January 2012, 20:30
#2
Yes its in manual can't remember how tho I've done it much better also locks when get to 10mph on its own
-
5th January 2012, 20:37
#3
On a Sabbatical
Cheers bud, I'll have a look at it now.
-
5th January 2012, 20:38
#4
As said its in the manual.
Something to do with pressing the lock button in the car on the electric window switch and the remote.
-
5th January 2012, 20:40
#5
On a Sabbatical
Only a service book in the glove box, no manual!! Still need help lol
-
5th January 2012, 20:46
#6
unlock all doors and boot with one press of remote key.
1, Sit in the driver’s seat with the doors shut and keys in hand.
2, Press and hold the UNLOCK button on your remote key + simultaneously pressing the door lock button on your drivers door.
3' Keep pressing for around 10 seconds until your a faint SINGLE beep.
4, Test for activation
-
5th January 2012, 20:47
#7
On a Sabbatical
I'll go and give that a go now, thanks. I'll let you know in a few minutes
-
5th January 2012, 20:48
#8
Lock at 10mph
1. Sit in the driver’s seat with the doors shut and key in hand.
2. Press and hold the LOCK button on your key + simultaneously pressing the door lock button on your drivers door.
3. Keep pressing for around 10 seconds until you hear two faint beeps.
4. Test for activation
To disable the speed dependant door locking do exactly the same as above but you will hear one faint beep.
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
5th January 2012, 20:48
#9

Link to thread about the 'Vectra Secrets you would know if you Read the Manual'.
Lots of info there.
http://www.vectra-c.com/forum/showth...=86965&page=36
-
5th January 2012, 20:55
#10
On a Sabbatical
Bookmarks