Abs/Traction prob

**cjam27** · 27th May 2011, 21:45

Hi guys, got a problem with my abs. Put it on a scanner today and got a fault with nsf wheel speed sensor. The abs cuts in when driving but more when turning at low speed, I've checked abs plug and it was badly corroded (it has been arcing out and gone green). The problem is its the harness end, what do you reckon is the best fix apart from complete harness? Its getting a bit scary now as when on I'm on the dual carriageway doing 70mph then the ****** thing cuts in!

**TimTay** · 28th May 2011, 08:15

Someone on here told me you can get a harness repair kit but when I mentioned it to my dealer they looked at me like I had 2 heads. So I just cut out the dodgy section and soldered in some new wire. My problem was solved

**Al 22 dti** · 28th May 2011, 08:40

Originally Posted by TimTay

Someone on here told me you can get a harness repair kit

it depends how far down the wire is bad as the wire goes right inside the hub almost.

**TimTay** · 28th May 2011, 08:47

For me there are 3 parts. The wire from the hub. The link wire that connects from the wire on the hub to abs harness on the car. Its the actual abs harness on the car I was wanting this repair kit for. But couldn't find. So made my own.