torx sockets

[slugo]

anybody know the common sizes of torx sockets required to do the brakes on a 1.9 cdti , i was about to buy a set

[markj23]

anybody know the common sizes of torx sockets required to do the brakes on a 1.9 cdti , i was about to buy a set

front or rears? rears you dont need Torx its Allen key would think fronts are the same unless your changing discs

[slugo]

yeah it was the discs i was changing , just a general clue as i,m not sure of the sizes with star ones

[marktaylor]

front is allen key as well

i do believe its a 7mm

sorry didnt see las post
i believe it either a tx 25 or tx27

[slugo]

i,ve got plenty of socket allens so thats ok

[Jezzy]

E20 for the front brakes, E18 for the rears.

[slugo]

the ones i was looking at go,s from e4-e20 maybe as high as 24

[John LE]

I'm not exactly sure which one is on the front (possibly e20) but I have this set

http://cgi.ebay.co.uk/DRAPER-14-PIEC...item1e5f14e0b8

It has nearly every single size of torx socket you'll need on the Vec

[slugo]

good thats what i,ll get then E4-E20

[markj23]

make sure you have a breaker bar the carrier bolts are 120 nm (FT)