Vectra c sri leather seat fitment help?

[matrix1979]

Hi there
i firstly would like to thank in advanced ..
i have been offered a set of half leather seats from a vectra c 3.2 gsi 53 plate for £ 300 incl is pair front seats ,rear seats ,door cards ,centre armrest and trims . what i need to know is will these fit into a vectra c 2.0 turbo sri 08 plate without any issues involved ie wiring under seats ,fixing position etc . also will i get any issues with any lights suddenly appearing on the dash as i disconnect the old seats . ? cheers again mark .

[bish]

Hello fella, im the one selling the seats, whats the sri got in it, should have sports seats in it already with the larger bolsters etc, in cloth or half leather trim

[matrix1979]

hi mate lol what a small world we live in today yer it has the standard sri seats in cloth . will they fit?

[DAVIDD88]

They will fit I recommend you disconnect the battery and once fitted they will show an airbag fault which can be cleared with a good fault code reader

[Critch]

Should fit mate. Just make sure you disconnect the battery

[Aidi]

Removed my original Sri seats and fitted elites, then changed again to Sri leathers.. Battery was never disconnected when I did mine, and on the first change the airbag light came on as the retainer clip on the seat plug snapped. As soon as it was replaced the light went out.

Where as I did this without disconnecting the battery, if I was doing it again I probably would.

[merikiito]

Changed loads of interiors and never disconnected the battery. The airbag light will only stay off if you fail to connect everything correctly. Once everything is correct the airbag light will go out without having to be reset or it has in all the times its happened to me

[hairy31]

Changed loads of interiors and never disconnected the battery. The airbag light will only stay off if you fail to connect everything correctly. Once everything is correct the airbag light will go out without having to be reset or it has in all the times its happened to me

As above, never had a light come up on mine , but battery disconection is probably a wise move

[aps]

Hmmmmmm.... this brings back memories ..

Ive change 2 Ford Cougar interiors in my time & both times hit major issues !

Im not saying it will be the case with VX but with the Cougar both times the wiring loom / connectors were totally different on both occasions ! i had to hard wire the first set in & the second set was different again , couldnt work it out at all so had to make do without some seat functions.

Good luck anyhoo..

[merikiito]

Hmmmmmm.... this brings back memories ..

Ive change 2 Ford Cougar interiors in my time & both times hit major issues !

Im not saying it will be the case with VX but with the Cougar both times the wiring loom / connectors were totally different on both occasions ! i had to hard wire the first set in & the second set was different again , couldnt work it out at all so had to make do without some seat functions.

Good luck anyhoo..

Thats what you get for owning a Ford. There are no problems as VX use the same plugs on all the Vectra c/Signums for seating.