User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 9 of 9

Thread: help needed, few problems to which i dont have experience

  1. #1
    Regular Member jay14's Avatar
    Join Date
    Feb 2012
    Location
    DURHAM
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default help needed, few problems to which i dont have experience

    hi guys, havent been on here for a while due to family circustances.. having issues with the signum, wanting to know if anybody in the north east wants to make a few quid helping me out. i dont have alot of mechanical experience and have a few problems with my signum.

    1) a heating problem, luke warm air only coming through when i use the heated windscreen button as my fans dont work anymore (non of them)

    2) i have a shaking steering problem at around 70mph +

    3) i need to find where i can get a new button soldered into my key fob as the open button has decided to stop working..

    i am more than happy to pay for the work to be done to get it back to running nicely again, just dont want to get completely ripped off by garages around the area when they will start changing parts that dont need to be changed.

    any help would be greatly appreciated..

  2. #2
    Regular Member Critch's Avatar
    Join Date
    Dec 2009
    Location
    wirral
    Post Thanks / Like
    Mentioned
    61 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vauxhall vivaro

    Trim : Basic

    Engine : 1.9

    Year : 2004

    Default

    1) will be heater resistor see how to easy job to change

    2) would start by getting wheels balanced

  3. #3
    Regular Member
    Join Date
    Sep 2012
    Location
    expat Lancashire lad in the Midlands
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Signum

    Trim : Elite

    Engine : 3.2

    Year : 2003

    Default

    Signum-steve posted recently about new tie-rods and bushes helping to sort wheel vibration.

  4. #4
    Regular Member
    Join Date
    Jan 2011
    Location
    stratford upon avon
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vectra c

    Trim : ls

    Engine : 1800 non vvt

    Year : 2004

    Mileage : 167340

    Default

    does heater number 4 work ?

    2) i have a shaking steering problem at around 70mph +

    i cured mine when i had the wheels balanced

  5. #5
    Regular Member jay14's Avatar
    Join Date
    Feb 2012
    Location
    DURHAM
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    I have had the wheels balanced twice but still no joy, I was going to try and use another set of wheels to see if they are causing the problem or not.. Then I can at least take them out of the situation if its bit them.. Just hoping its something simple like track rod ends or something, just dunno if any of you's lads are mechanical minded or have garages yourselves that could do the work??

  6. #6
    Regular Member jay14's Avatar
    Join Date
    Feb 2012
    Location
    DURHAM
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Oh and also, the heater did work on number 4 a while but stopped working completely on the fans 1-4.. Now the fan only works on the heated windscreen button, eventually it puts out just like warm air.. I have an idea it could possibly be the thermostat but not sure, was also maybe thinking the car could benefit from a coolant flush through the system..

  7. #7
    Regular Member
    Join Date
    Jan 2011
    Location
    stratford upon avon
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vectra c

    Trim : ls

    Engine : 1800 non vvt

    Year : 2004

    Mileage : 167340

    Default

    what does your thermostat gauge read?

  8. #8
    Regular Member
    Join Date
    Oct 2009
    Location
    UK
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : z

    Trim : z

    Engine : z

    Year : z

    Default

    If the fans worked on only 4, then stopped altogether, it'll be the resistor and the relay behind the glove box.

    If temp gauge doesn't get to 85/86, get the thermostat changed.

    If balancing wheels doesn't cure vibration, could be inner tie rods, track rod ends, ball joints, or brake discs (how old are your discs?)

  9. #9
    Regular Member
    Join Date
    Jan 2011
    Location
    stratford upon avon
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vectra c

    Trim : ls

    Engine : 1800 non vvt

    Year : 2004

    Mileage : 167340

    Default

    Quote Originally Posted by tony-1977 View Post
    If the fans worked on only 4, then stopped altogether, it'll be the resistor and the relay behind the glove box.

    If temp gauge doesn't get to 85/86, get the thermostat changed.

    If balancing wheels doesn't cure vibration, could be inner tie rods, track rod ends, ball joints, or brake discs (how old are your discs?)


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. help please advise needed dont want to go to bed till i know
    By 6009tristanb in forum Engine & Drivetrain
    Replies: 13
    Last Post: 22nd July 2011, 00:30
  2. stalk problems still dont work v6 cdti sri vectra
    By v6 sri diesel in forum Vectra C / Signum Car Chat
    Replies: 4
    Last Post: 10th December 2010, 11:56
  3. stalk problems dont work v6 cdti sri vectra
    By v6 sri diesel in forum Vectra C / Signum Car Chat
    Replies: 26
    Last Post: 20th November 2010, 21:22
  4. Three problems !! help needed please
    By nellie0026 in forum Vectra C / Signum Troubleshooting
    Replies: 8
    Last Post: 25th June 2008, 15:42
  5. Three problems !! help needed please
    By nellie0026 in forum Vectra C / Signum Troubleshooting
    Replies: 0
    Last Post: 20th May 2008, 22:39

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •