lost wheel locking nut socket

**mustangboy** · 16th November 2009, 00:11

Hi all.
i have lost the socket/key fpr removing the locking wheel bolts. any one know if it is possable to get a replacement from main dealer ???

**Big Dave** · 16th November 2009, 01:03

Yes, providing you've got the serial number - which is on a piece of cardboard in the plastic box where you store the non locking bolts and key.

**Big Sig** · 16th November 2009, 01:04

yes is is but you need the number of it. Should be on a bit of card in the case the lockers come in. Without that it may get expensive.

**JagRigger** · 16th November 2009, 07:42

Just had to get a new key myself. Main dealer's attitude sucked though. They wouldn't even take an order for the key over the phone. OK, I can understand when I collect it I'd need the V5 etc, but to order one ..... ? To go in is around a 40 mile round trip, plus having to knock off work early !

I'm keeping my eyes open on e-bay for another set in my number - dealers charged me £25 just for the key

**JonSRi150** · 16th November 2009, 10:24

Yes you need the number as everyone else said, if not you will need to either take it somewhere that will hit a special socket on (it cost me £5 per nut) or you could hit a smaller socket on it, you will need to replace them all then so hope you have the number.