same process as vectra bumper removal???

[signum03]

hi all, as above fitting a tow bar tommorow and need to remove rear bumper, is the signum bumper the same as the vectra?

[signum03]

bump

[Deztroyer]

yep, quite close... you'll need the rear lights out, the screws out of the arch liners, the clips are mostly the same but there are hidden fixings....

open the bootlid, look down at the 'land' on the bumper.. you'll see a seperate panel just by the seal to the loadfloor. Prise that forward ( will be stiff) and it will reveal the hidden fixings..it will then 'pop' off the same as a vectra's..

[signum03]

any risk of bumper damage?

[Deztroyer]

better done in a warmer enviroment as the plastic will be more "flexible"
but if your careful and take yoru time - should be ok

[signum03]

i guess there is not a pictured how 2? had a look and its only for vectra???

[signum03]

any pics of removal? need all the help i can get!

[signum03]

bump

[signum03]

bump