More problems with the sterio

**twaiter** · 6th October 2009, 21:49

Hi guys, i got the sterio today, managed to get the cage and everything out and the facia etc back in.
but the connectors on the pioneer are differant to the one on the car, the only thing is these connectors with the sterio are supposed to work with the controles etc aswell.
and someone on here told me what ariel adapter to get, but its the wrong ****** one!
So Queston is:

what wiring harness will i get? because i dont want the one that will replace all the wiring that i already have etc.
any suggestions?

**twaiter** · 7th October 2009, 12:41

right guys i got the connector lead etc, but when its all plugged in theirs no action on the stereo..
i dont get it! Any ideas?
the adapter i got was autoleads pc2-85-4

**twaiter** · 7th October 2009, 15:44

its fine i got it.

**neverlandandy** · 7th October 2009, 16:39

it's good when you talk to yourself lol wheres the pics ??

**twaiter** · 7th October 2009, 19:24

lol i didnt take pics cause i didnt think any one was interested!

i'll try get some done tomoz for u.
Any idea why i have no radio connector? lol, i dont have the radio! Aghh

**danlat1415** · 7th October 2009, 23:20

It may be that the power and ignition cables are the wrong way round (you get this with some stereos/wiring looms.

The loom may have the red wire and yellow wire that you can disconnect half way up, and swap them over, so it goes red/yellow and yellow/red if that makes sense.