So what can be fitted to this then with 18" wheels? Any other GM motors that are compatible?
I'm a big fan of good stoppers, especially if I can get em cheap!
So what can be fitted to this then with 18" wheels? Any other GM motors that are compatible?
I'm a big fan of good stoppers, especially if I can get em cheap!
314MM upgrade from LMF, mention your a vec c member for good discount. Failing that, try a Saab dealer .
Have consideration for the deaf, if you're gunna fart, make it smell !
Cool thanks. Is that a standard fit on a saab 9-3 then? Will the calipers go straight on?
Saab 93 areo = 314mm. Vec 3.2/3.0cdti also = 314mm
VXR 345mm will also fit under 17/18" wheels
told you this site was going to cost you lots of money
0-Large smile ......every time it's driven
The 314's are worth EVERY penny on the 150 mate. I don't know why they didn't fit them as standard to be honest
Why does everyone keep forgetting about the rears!?> doing the front only
Current :
Front : 285mm ventilated
Rear : 278mm solid
Upgrade :
Front : 314mm ventilated
Rear : 292mm ventilated
You will also need the brake bias checked and adjusted after fitting
The full service stopping distance will be reduced by about 6%
Only because most (not all) of the braking is done with the front brakes. I just wanted to bring mine into line with the 3.0 V6 diesel with 314 front and 278 rear as they work fine. I also upgraded the brake hoses to braided ones (Goodridge) all round and that also helped make the pedal much firmer
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks