T/c On 54 reg cdti

**Clugie** · 14th July 2009, 21:26

Was just wondering if any1 has fitted a traction control button to there 54 reg vectra or if i can fit it an will it work
thanks

**Vaux-Man-G** · 14th July 2009, 21:38

I asked this, and was told that the Diesel's dont have switchable TC, the button may simply work as another lit up switch.

**Clugie** · 14th July 2009, 21:54

Do you kno how i get the blank off so i can see the plug??? do i just stick a screw driver behind it an just go for it or is there a proper method of doin it???

**Vaux-Man-G** · 14th July 2009, 21:57

Originally Posted by Clugie

Do you kno how i get the blank off so i can see the plug??? do i just stick a screw driver behind it an just go for it or is there a proper method of doin it???

Thats how I would do it, but be VERY careful not to damage the rest of the dash trim. Stick a piece of cloth either side of the screwdriver and use a thin one!

**Clugie** · 14th July 2009, 22:12

Ok will do thanks for the advice

**Big Sig** · 14th July 2009, 22:30

Originally Posted by Clugie

Was just wondering if any1 has fitted a traction control button to there 54 reg vectra or if i can fit it an will it work
thanks

It may do, it may not

Originally Posted by Vaux-Man-G

I asked this, and was told that the Diesel's dont have switchable TC, the button may simply work as another lit up switch.

If it has TC then it may be able to be switchable too.

Originally Posted by Clugie

Do you kno how i get the blank off so i can see the plug??? do i just stick a screw driver behind it an just go for it or is there a proper method of doin it???

Blue tack. Stick it on and pull the blank out. Trying to use a screwdriver will probably damage the sourround. If the plug is there - not all have them - then its still only about 50/50 that it may work.