Anyone with PI Springs on a CDTi SRi...?

**Dan_BlackSRi** · 29th June 2009, 10:24

I was wondering if anyone had a set of PI lowering prings on a SRi CDTi..? I hopefully will be getting my springs replaced soon (and have seen loads of pics with Eibachs) and wondered if anyone had any pics..??

I still can't decide if the Eibachs is low enough - wouldn't want to spend all that money and then not really be able to tell

Any pics etc would be awesome

**parsco** · 29th June 2009, 10:26

Big Rich has PI's fitted to his mate.

Mine fitted with Eibachs and you really could notice the difference

especially at the front (as long as you buy the right ones

)

**Dan_BlackSRi** · 29th June 2009, 10:29

Originally Posted by parsco

Big Rich has PI's fitted to his mate.

Oh yeah, forgot his was a CDTi.....

Originally Posted by parsco

Mine fitted with Eibachs and you really could notice the difference

especially at the front (as long as you buy the right ones

)

Thats whats putting me off the Eibachs, the whole spring weights thing - somepeople have bought one set and been fine, others with the same set and its not worked out - I just fancy buying some springs and be assured that when they're on it will be lower - i.e. once there on, there on.

**parsco** · 29th June 2009, 10:50

What's happened mate is that some people have bought the wrong weights for the fronts.

If you buy from HERE and make sure that you order the ones below and you'll be fine mate. (They are the exact ones that I bought

)

Application :Vectra C (Z-C) Saloon 1.8/2.0 Turbo/2.2/3.2/1.9 CDTI/2.2 DTI 04/02>
Product Code:E10-65-007-01-22
Details :Lowering Front/Rear = 30mm/30mm
Axle Load: Front = 1060kg Rear = 980kg