8-part cover set (for A, B and C window pillars)

[crofty]

dose anyone know where i can get a 8-part cover set (for A, B and C window pillars) as fitted to the i 500 and how much and would help if anyone has a part number a lot to ask for sorry

[ditchp]

if you mean the IRMSCHER door pillar trim kit then they have stopped making them, and you just missed out on a set on here....
best bet is to keep an eye out on ebay both here and german one but be warned they are as rare as rocking horse poo and the price aint cheap either...


hth

[crofty]

ok is it right lmf are looking in to making a rep of them

[collow123]

If big rich makes some templates up of the ones he bought i'm going to have a bash at making some carbon ones out of c/f sheet it can't be too hard

[Robbie69]

If big rich makes some templates up of the ones he bought i'm going to have a bash at making some carbon ones out of c/f sheet it can't be too hard

Real carbon? Been thinking the same myself but where do you get a sheet big enough?

[collow123]

Had a look on ebay you can get sheets up to 1000mm x500mm in 2mm c/f for about £60 which i think could get you 2-3 sets

[collow123]

Also someone was selling c/f nova door skins and they were thin so for £80 i thought i could cut them up if need be as they are flat not moulded

[arkhan78]

if you mean the IRMSCHER door pillar trim kit then they have stopped making them, and you just missed out on a set on here....
best bet is to keep an eye out on ebay both here and german one but be warned they are as rare as rocking horse poo and the price aint cheap either...


hth

do we need to start a petition for big rich do do these templates i reckon its a goer!

[Tadpole]

Would be most useful to have something like this to play with. Once you have the pattern who knows what people will come up with ...........

[big rich]

i will make templates for other users, not a problem guys