New Smd 501 sidelights and number plate light

[3.2wales]

Got these smd lights they do not show any fault reading on your mid and they are very bright the 501s look sweet and the rear ones even light up the floor the only small problem at the momment is that when you switch your lights off they flicker for about 1min spoken to the supplier and he is looking into it


The light on the road is from the smd


Front ones fitted


Taken from a distance


Front close up

Will keep you posted

[glenboy]

The canbus system don't like LED's,thats why they flicker.

[3.2wales]

The canbus system don't like LED's,thats why they flicker.

Any idea how i can sort it ?

[Dan_BlackSRi]

I assume the number plate lights don't flicker?

[vec3.2]

You neeed a resistor of some sort..i had these in my car..soon the orange side light will come up and will only go away if you take them out.

[3.2wales]

The 501 have resistors fitted on the smd board with the rear do not flicker when they are fitted alone but as soon as you put the fronts in they do flicker as well ?