hid kit problem URGENT!!!

[penfold1981]

hi guys im new to this site but have a question?

I have fitted a hid kit from diane-shop and fitted to the car. when turned on the bulbs flicker. so i fitted a relay kit which takes the power direct from the battery. still flickers!!!

what else can i try to stop the bulb check?

can it be turned off with the aid of op-com?

[glenboy]

You can either buy some cancellers or have your car tech2'd to change it to Zenon headlights,i think the cancellers are the cheaper option,hth.........

[penfold1981]

where can i get them from? can it be turned off with op-com?

[Ste]

The lights will always flicker, you need to fit capacitors to prevent it happening. The bulb check also needs a resistor to be fitted.

Do a search on here and you will find all the details, it's been posted many time before...

[glenboy]

Ebay m8,no it has to be Tech2 at your dealer.

[fbsd]

warning cancelers.....stops the warning and the flicker...... sometimes listed on ebay as canbus warning cancelers

[fbsd]

.....no need for tech 2, resisters or capacitors, cancelers incorperate all this

[penfold1981]

i bought this
http://cgi.ebay.co.uk/ws/eBayISAPI.d...fvi%3D1&_rdc=1

i thought this was meant to stop it happening?

[Ste]

.....no need for tech 2, resisters or capacitors, cancelers incorperate all this

Yes, the cancellers are resistors and capacitors in a box, with a price tag to reflect that someone has boxed it up ready for you.


I even did a circuit diagram for what the cancel box is, and it's very simple indeed.

Here
http://www.vectra-c.com/forum/showth...circuit&page=3

You will need one per light unit

[Ste]

That Ebay item is just a relay wiring, not cancellers.