wheel nut covers help

[signum03]

hi all, have asked this before a while back but with no joy, i need a full set(20) wheel nut covers that are 50mm long for my signum , looked on ebay and most are 32mm, phoned stealers and they want £2 per cover! any ideas on where to get a set for less£££££££££££££?

[signum03]

[gtr1000]

IIRC, you only need 16 as the locking bolts don't have covers. I just wish someone made a cover for the locking nut as the uncovered one is an eyesore.

[Big Sig]

Are you sure you need 50mm as I have a set that I am about to cut down as they stick out far too far! The 32mm are the right length for mine - std vx wheels. The 50mm fitted nicely on the Irmy ones.

[darko2301]

IIRC, you only need 16 as the locking bolts don't have covers. I just wish someone made a cover for the locking nut as the uncovered one is an eyesore.

irmscher makes them and me has a set

[signum03]

had a look at irmscher site cant find them can someone send a web link to them please.thanks

[signum03]

just found them on their site but does not mention length???

[darko2301]

length of the bolt or the cap?
i have both so i can measure it for you but note that caps will fit only the irmscher bolts which makes sense hth..

and it hasn't been mentioned yet - do you have locking bolts too or not because it won't be hard to find adequate caps on ebay if you dont..