-
Regular Member
56 plate Vectra C 150 Sri Dash Bulbs
Hi all,
I have a 56 plate Vectra 1.9 Cdti SRI 150.
I want to change the bulbs out with LEDS and a colour change. I got a kit from ebay and now need to fit them.
I cant find a "how to" for my car on here.
I found one, but my car is not the same and i was not able to get the dash out to change the bulbs over.
I took the two screws out from steering column.
Pulled off the trim below my air vent.
And was able to part lift out the top part of the steering cover. That was as far as i was able to go.
Does anyone have a "how to" that covers my car?
I did search about on here, but not found one that matches my car.
Cheers
-
Mate, Drop Kman a PM, he will help you, i dont think there is a How To , Kman did mine, top job
-
Regular Member
Nice one, I will see if he replies on here, if not, will drop him a PM and see what happens.
Cheers
-
On a Sabbatical
http://www.vectra-c.com/forum/showthread.php?p=432872
you need to move the wheel down and away from the dash
-
Regular Member
Originally Posted by
sentinel_uk
I want to change the bulbs out with LEDS and a colour change. I got a kit from ebay and now need to fit them.
hope your kit works
as the vectra doesnt have bulbs in any sense of the word. Its lit by tiny SMD leds like this
-
Regular Member
"tiny SMD leds"....... Nooooooooo...!!!!!
Was sold the wrong thing there then.
Thanks for the warning, Payed off for me there, Saved me pulling it all apart (now i know how to) to find out they were wrong.
Will have to have another hunt around for the correct parts.
Cheers
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Regular Member
-
Regular Member
looks sweet.
You got a link to place you get hold of the leds?
Bookmarks