Removing Rear Lights

[corsa_si]

Wanting to fit my new smoked rear lights but can't seem to find a how 2 on it and can't find anything on the forum. Can't find anything to unscrew so do they just slide off?

[Tadpole]

removing the rear bumper tells you How2 hth ..................

[Ben999]

In the vec boot (well in mine) there are two compartment, one on each side. Go into them and you can get to the back of the lights. You will see three nuts holding it on. These iirc are 8mm hex nuts. 3 on each light, then pull the light out from the outside. Unclip the wiring loom and all done

[neverlandandy]

2 min job and thats both sides

[glynn]

In the vec boot (well in mine) there are two compartment, one on each side. Go into them and you can get to the back of the lights. You will see three nuts holding it on. These iirc are 8mm hex nuts. 3 on each light, then pull the light out from the outside. Unclip the wiring loom and all done

what he said, but they are 10mm nuts

[big rich]

should take 5 mins a side tops m8

[neverlandandy]

he would have found that out when his 8mm didnt fit then he would be back on here yelling at us

well spotted lol

[Ben999]

what he said, but they are 10mm nuts

Cheers, I only did them ta couple of weeks ago and couldnt remember. I was only 2mm out!!

[glynn]

Cheers, I only did them ta couple of weeks ago and couldnt remember. I was only 2mm out!!

2mm is 2mm my friend lol,

[Ben999]

haha, its nothing... honest