signum rear end? tips?

**arkhan78** · 2nd April 2009, 00:02

Hi all

need some advice...the back end of my signum really needs an exhaust showing....it looks too plain and boring.

i want to get a normal chrome tip exhaust end and the trim changed any suggestions guys.

saw this on ebay http://cgi.ebay.co.uk/vauxhall-signu...1%7C240%3A1318 mines a 2.0 dti so is it a straight swap? then all i need is the trim, or do i just dremmel my own exhaust hole?

Attachment 18866

**arkhan78** · 2nd April 2009, 00:07

looking for a change so the rear end looks a little like this...Attachment 18867

**arkhan78** · 2nd April 2009, 10:59

anyone?

**n_hudson** · 2nd April 2009, 11:05

I think the tip is welded onto the end of the exhaust. I pretty sure you'd have to cut it off and either weld on a new exit or buy one that clamps on. The skirt would have to be changed too. Either look on ebay for a Signum rear bumper or a signum thats being chopped up. Or its a trip to the dealers...

The back box should fit, cant see a reason why not. You'd just have to make sure it would all align up in the right parts underneath before buying it thou.

**Deztroyer** · 2nd April 2009, 14:54

you can buy the bumper insert the part no is on the parts page

the rear pipes "dip" and would need to be cut off - you wont find a bolt on embellisher owing to the design of the tailpipe and distance needed to exit the bumper- most stainless exhaust centres would not charge much for a "cut and shut" replacement or you could go for a stainless bax box and save yourself additional costs in the future

i hope this helps

regards
Dez