Since cleaning out my EGR and intake I keep getting a P1112 fault come up along with the emissions light on my 2.2i direct. Can you clean these?
Attachment 18446
Since cleaning out my EGR and intake I keep getting a P1112 fault come up along with the emissions light on my 2.2i direct. Can you clean these?
Attachment 18446
Retracting what i said, thought it was a Diesel lol.
No not the dirty stuff.
sorry for butting in mate but how did you clean the egr on your direct as i believe it is watercooled and not straight forward to do?
It is water cooled but you don't get that much coolant leakage. I'm no mechanic and I can do it.
nice one, did you find it needed done or were you doing it for the sake of it? any more info on this would be appriciated as i fancy doing this myself
I did the air intake and thought I would do the EGR. I changed the plugs as well and it went very well afterwards.
I will have a go at the intake this weekend but think the swirl problem may be expensive.
at first try the newest software to engine ecu. if this does not cure P1112 then you may try to clean (somehow) the swirl valve outer joints below intake manifold but probalby new valves (93192896)will help you. the swirls on Z22YH intake manifold can be replaced separately (not with intake manifold likke on Z19DTH). cost you ~200 EUR.
New software, what does that change?
Less that what I thought it would cost.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks