it's off a saloon and my veccy is a hatch would have thought it would but need to be sure!
cheers
http://cgi.ebay.co.uk/Vauxhall-Vectr...|39:1|240:1318
it's off a saloon and my veccy is a hatch would have thought it would but need to be sure!
cheers
http://cgi.ebay.co.uk/Vauxhall-Vectr...|39:1|240:1318
It looks the same as my Hatchback version.
Electrics? - what's your plan?
Unless it had the plates to go inside the boot i would avoid
They would be easy to put together though, as they're only bits of flat plate to spread the loads a bit.
The bolts go through the chassis and up into the boot floor. The plates go on the boot floor to spead the weight
ok i assume the holes will already be in my chassis? sounds as though the plates will be easy enough to fabricate. if thats all they are.
Cheers
The holes have to be drilled but there are dimples on the boot floor under the sound deadning
You'd also need high tensile sleeving to go into the chassis leg to stop it collapsing
Last edited by John LE; 25th March 2009 at 18:35.
hmmmm ok and would the other side of the chassis underneath the car need drilling too? if so do you know if thats marked also?
sounds like you've done it before!
Well make sure you fit it correctly because they are part of the MOT test now
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks