Right will be attempting a swap soon so just wanted to run a few things by some of you's that know or anyone thats understands these diagrams just to double check the way i need to rewire both CID plug and Radio plug
Just looking at the wiring diagrams this one is for the CDR2005/2206 Radio plug
This ones for the NCDC2013 Radio plug
And this is for the GID All models
GID
pin 1 Brown --> Ground
pin 4 Black --> X11.12
pin 5 Red --> X11.15
pin 8 Red --> Radio 7
pin 14 Brown/wh --> Diag plug 12
pin 19 White --> Radio 33
pin 20 Green --> Radio 32
pin 22 Green --> Diag plug 3
pin 23 White --> Diag plug 11
pin 25 Green --> Airbag 8
pin 28 Green --> BCM.40
pin 29 Grey/wh --> Radio 1
pin 30 Black/wh --> Navi 29 (radio pin 29)
pin 31 Red --> Radio 2
pins 9,10,11 on GID not needed
RADIO PLUG
All the same pins on radio except these
CHANGE
cdr2005 -- > Pin 27 --> Diag 8 this needs to be put into diag pin 12 (theres all ready a wire there so will just tap into it)
ADD
Pin 19 of GID/CID --> Pin 33 of Radio
Pin 20 of GID/CID --> Pin 32 of Radio
Pin 30 of GID/CID --> Pin 29 of Radio
and finally pins 3,17,24,25,30 not needed on Radio plug as these are for twin audio/travel assistant
All so as its a GID and not a CID i'm fitting theres no need for the RGB pins and VDA + i dont want Telephone so no need for them
Let me know if it looks right
Bookmarks