Lowering springs

[parsco]

Right which lowering springs should i go for? I'm looking at the PI (45mm front and 40mm rear) or the Eibach (30mm all round).

I need some advice on which people think are better and why. Will the Eibachs actually make the car look any lower (will only lower my SRI by 15mm)?

Help

[big rich]

mine sits perfectley level, handle great, 45 front and 40mm rear

[parsco]

mine sits perfectley level, handle great, 45 front and 40mm rear

How do you get on with your front splitter mate? Have you had any problems with it getting close to the floor on ramps etc...? What about the handling?

[big rich]

How do you get on with your front splitter mate? Have you had any problems with it getting close to the floor on ramps etc...? What about the handling?

on the 19"s its fine with the splitter,does not catch at all and there are lots of speed bumps by where i live.

the handling is great, very sporty feel and its not to harse, if you want the looks as well as performance then go for these m8, you will love them

[big rich]

a lot of people will choose Eibach (30mm all round) but for me there just not low enough

[simac]

Have been happy with Koni on mine, getting a bit fed up with speed bumps though cos I have to practically crawl over them or knock my teeth out lol !

It sits about 15 mm lower than the standard SRI springs and it is noticeable.

[bertbuckie1]

i ordered spax ones for my signum..... Vauxhall Signum 1.8/2.0T/2.2DGi Z-C/S 03- 35/25mm Spax Lowering Springs----- is this 35 at back, 25 at front or other way round? fronts already quite low hope it is 25 front, 35 back!

[8786melle]

had PI springs fitted to my signum didn't look any different as I have the design which sits lower than other models anyway, the car is alot harder that is the only difference really. If you had another model then I should emagine you will see/feel the difference (only fitted them as I had a fractured spring and lowering springs are cheeper than standerd ones from vx) your sri wont realy look any different will just be harder ride, go for PI as they are cheeper, Eibach if you have cash to throw away lol

[simac]

Strange that, my SRI is lower and harder on the Koni springs ! handling is good but thinking about getting VX spring back on it for the better comfort.

[bertbuckie1]

had PI springs fitted to my signum didn't look any different as I have the design which sits lower than other models anyway, the car is alot harder that is the only difference really. If you had another model then I should emagine you will see/feel the difference (only fitted them as I had a fractured spring and lowering springs are cheeper than standerd ones from vx) your sri wont realy look any different will just be harder ride, go for PI as they are cheeper, Eibach if you have cash to throw away lol

strange i thought the design was only loewred 15mm new?