Font Foggy Bits

**jonnye** · 3rd April 2006, 19:34

1 hour

1 blister

1 small scratch

**armoured farmer** · 3rd April 2006, 19:35

nice one mate, get the pics bigger as im old...lol

**Mrs D** · 3rd April 2006, 19:37

Originally Posted by jonnye

1 hour

1 blister

1 small scratch

...........and thoroughly worth the effort as well matey - surprising how such a small mod makes such a difference!

**ed taylor** · 3rd April 2006, 19:39

Yes I think the effort was worth it too, they look great.

**cpt slow** · 3rd April 2006, 19:39

Originally Posted by armoured farmer

nice one mate, get the pics bigger as im old...lol

LOL Micky cant you see the picture !

Nice job there mate well done

**Steven** · 3rd April 2006, 19:46

very nice mate, want to do that to mine..

**jonnye** · 3rd April 2006, 20:28

don't know if the how 2 is out of date but

I had 4 torx bits each side to remove, 2 on the wheel arch and 2 under the bumper just infront of the arch.

"Theres 5 plastic rivets underneath the car (4 securing the back of a dirt sheild, and 1 combined fixing which also secured the small black plastic skirt. To remove just push the central pin up and the rivet can be pulled out by the big head."

could only see 4 and you had to pull the centre pin downwards with a pair of plyers to remove the rivets

While the bumper is off, its a simple case of unscrewing 3 Torx srews per foglight.

My fogs were bolts heads not torx

and the bigest of all tips - make sure you place the bumper on a clean soft THICK colth to protect it

, or if you do as i did and use 2 old towels make sure they overlap so you dont end up with a gap.