does any one know how to change headlight bulbs on a face-lift model, i hace bought a h i d conversion kit and im not to sure of how to fit it thanks george
does any one know how to change headlight bulbs on a face-lift model, i hace bought a h i d conversion kit and im not to sure of how to fit it thanks george
Take off cap, pull out old bulb, push in new one, refit cap.
The passenger side is easy just remove the washer bottle filler neck, it just pulls off. On the drivers side remove the airbox, undo clip on top pipe and pull out, it's held on with three rubber bungs. This will give you plenty of room to work. The back of the light just twists off!
Good luck
to fit the hid kit honestly remove the bumper. get a friend to help you . only 4 screws under bonnet 2 in each wheel arch and 4 screws along the bottom plus 4 plastic rivit things then it come off. only 3 screws per headlight and they are off as well. just test the kit before you drill the caps on the back of the headlight. if al ok refit.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks