head light bulbs

**samngeorge1985** · 13th February 2009, 18:32

does any one know how to change headlight bulbs on a face-lift model, i hace bought a h i d conversion kit and im not to sure of how to fit it thanks george

**_ZS_** · 13th February 2009, 18:33

Take off cap, pull out old bulb, push in new one, refit cap.

**Zark** · 15th February 2009, 02:01

Originally Posted by samngeorge1985

i hace bought a h i d conversion kit

there's a 'how to' and various other threads on here if you look (or try the 'search' button!)

**Grimo72** · 15th February 2009, 10:16

Originally Posted by samngeorge1985

does any one know how to change headlight bulbs on a face-lift model, i hace bought a h i d conversion kit and im not to sure of how to fit it thanks george

easiest way mate, is to take off bumper (only 8 screws) you can then take out the actuall headlight unit makes it 100 times easier

**Robbie69** · 15th February 2009, 10:21

The passenger side is easy just remove the washer bottle filler neck, it just pulls off. On the drivers side remove the airbox, undo clip on top pipe and pull out, it's held on with three rubber bungs. This will give you plenty of room to work. The back of the light just twists off!

Good luck

**aerodynamic18** · 15th February 2009, 12:37

to fit the hid kit honestly remove the bumper. get a friend to help you . only 4 screws under bonnet 2 in each wheel arch and 4 screws along the bottom plus 4 plastic rivit things then it come off. only 3 screws per headlight and they are off as well. just test the kit before you drill the caps on the back of the headlight. if al ok refit.