SRi / VxR Hatch Spoiler

**AntSSSS** · 25th January 2009, 20:51

All,

Just a quick Q - How are these actually attached to the boot?

i.e. if looking at changing, whats needed??

Cheers A

**johnnyg** · 25th January 2009, 20:59

i think they are just bonded on mate sure some nice person will be along soon to correct me if i am wrong

**Maverick** · 25th January 2009, 21:01

The VXR spoiler is bonded on. You simply heat up your original lip spoiler and gently remove it, then put the VXR one in it's place.

You don't even need to remove the metal clips that are in the tailgate from the original lip. So the tailgate trim on the inside does not need to be removed.

**vectragsi3.2** · 25th January 2009, 21:29

Originally Posted by Maverick

You don't even need to remove the metal clips that are in the tailgate from the original lip. So the tailgate trim on the inside does not need to be removed.

i had to remove my trim so i could undo the nuts as the spoiler wouldnt budge otherwise then i heated it up again and it came off no problem