how hard is it??

[bigron1988]

debating weathere to put light washers jets on my car, how hard is it ? what parts do i need and how much about

thanks ben

[Guyver1]

debating weathere to put light washers jets on my car, how hard is it ? what parts do i need and how much about

thanks ben

theres a link in the how2 section i think

[ditchp]

it's dead easy matey, there is a how2 to follow but it's just plain common sense and a bit of drilling needed......just fitted my jet's and waiting for my ''high pressure pump'' from vx then i will conect it all up.....should all be plug and play too

as for cost...around £100.00 iirc

[mhvcbv]

hi
about £100 for the parts and a trip to vx to get it tech2'd

[ditchp]

hi
about £100 for the parts and a trip to vx to get it tech2'd

was told today that it should be plug and play, but make sure you have the ''white'' relay in the fuse box and harness at the washer bottle first....

[mhvcbv]

was told today that it should be plug and play, but make sure you have the ''white'' relay in the fuse box and harness at the washer bottle first....

i had a look on the how2 and it said tech2
http://www.vectra-c.com/forum/showthread.php?t=15101

[kenp]

was told today that it should be plug and play, but make sure you have the ''white'' relay in the fuse box and harness at the washer bottle first....

wasnt on mine.... had to program in CIM, UEC (and maby BCM)

[ditchp]

i had a look on the how2 and it said tech2
http://www.vectra-c.com/forum/showthread.php?t=15101

wasnt on mine.... had to program in CIM, UEC (and maby BCM)

also read on the how2 that tech2 would be needed, but when i asked the service manager today he was quite sure that it was plug and play....i'm all now...LOL

[mhvcbv]

also read on the how2 that tech2 would be needed, but wheni asked the service manager today he was quite sure that it was plug and play....i'm all now...LOL

when you get it all together and in you will have to let us know

[ditchp]

when you get it all together and in you will have to let us know

will hopefully be by the end of next week so will deffo let you all know