User Tag List

Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 2002 Vectra C 2.2Dti Spanner Light Help

  1. #1
    Regular Member
    Join Date
    May 2008
    Location
    London
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    confused 2002 Vectra C 2.2Dti Spanner Light Help

    Engine Type Y22DTR 90K Miles.

    When I start the car in the morning the Spanner light comes on (which is normal I believe) then goes off when I rev it a few times stationary.

    However sometimes when im driving and I come to a stop, the spanner light comes on.
    If I rev it a little to 2K and then let it idle back down (about 500) it sometimes turns off. About 5-10secs later the light comes on again.

    This happens only sometimes which is confusing me. Sometimes it wont come on for a week. Sometimes it comes on everytime it idles.

    I did some testing and the light only comes on when the car is idle at 500 or 600. it sometimes goes up to 600 then back down to 500 but not often, probably when its cold and I first start the car.

    If I come to a stop but keep the revs in above 600, the car runs fine.

    I serviced the car (oil, oil and pollen filter) but did not change the fuel filter yet as I did not have tools to bleed it. Could it be the fuel filter/pump etc.?
    I also tried to disconnect the batt for about 2 hours, it resetted the windows etc. but the light came on again.


    I haven't had a chance to get the car Tech2'd but if anyone could give me an idea of what the probem may be I will be extremely grateful.
    Thanks
    Last edited by kktdragon; 31st December 2008 at 17:23.

  2. #2
    Regular Member benny's Avatar
    Join Date
    Feb 2006
    Location
    dudley
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    i would start with the glow plugs and see if any are faulty

  3. #3
    Administrator plasma's Avatar
    Join Date
    Mar 2006
    Location
    On the Forum
    Post Thanks / Like
    Mentioned
    572 Post(s)
    Tagged
    1 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra

    Trim : SRi

    Engine : 150

    Year : 05

    Mileage : 74000

    Default

    spanner light coming on at idle only could be low vacuum from the pump. As your revs increase the vacuum then builds.. needs for the codes to be read really mate. Whereabouts in London are ya, think i've asked before?

  4. #4
    Regular Member
    Join Date
    May 2008
    Location
    London
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    I Live in North london, tottenham / woodgreen area.
    If it is the probems u mention, roughy how do I resolve this and at what cost?

    Thanks a lot guys.

  5. #5
    Admin & Membership Manager bigmac's Avatar
    Join Date
    Jul 2008
    Location
    Devon
    Post Thanks / Like
    Mentioned
    101 Post(s)
    Tagged
    1 Thread(s)
    Vehicle InfoStats

    Vehicle : insignia

    Trim : irmscher

    Engine : 2.0 cdti

    Year : 2009

    Default

    Quote Originally Posted by kktdragon View Post
    Engine Type Y22DTR 90K Miles.

    When I start the car in the morning the Spanner light comes on (which is normal I believe) then goes off when I rev it a few times stationary.
    Don't think that is normal mine don't come on at all when i start mine i get nothing in my little window

    Might be different on yours as mines a Y20DTH
    Last edited by bigmac; 31st December 2008 at 18:13.

  6. #6
    Regular Member
    Join Date
    May 2008
    Location
    London
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    It says so in the manual lol, something about if it comes on and turns off it is normal, or possiby a previous probem was registered and then fixed. (but not cleared?) im not so sure.


    I've checked this forum about the glow plugs: http://www.vectra-c.com/forum/showthread.php?t=23774

    Seems like im having the same issue, Light comes on every morning or when the engine is cold.
    Last edited by kktdragon; 31st December 2008 at 18:25.

  7. #7
    Administrator plasma's Avatar
    Join Date
    Mar 2006
    Location
    On the Forum
    Post Thanks / Like
    Mentioned
    572 Post(s)
    Tagged
    1 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra

    Trim : SRi

    Engine : 150

    Year : 05

    Mileage : 74000

    Default

    If you wanna meet up somewhere near the A406 Walthamstow or somewhere i could do a code reading for ya and point you in the right direction. Yes if the spanner comes on it means its logged a code and either the faults gone now or still present but not so bad a fault as to keep the spanner on. Lemme know,

    I'm free this weekend if you wanna check.

  8. #8
    Regular Member
    Join Date
    May 2008
    Location
    London
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Quote Originally Posted by plasma View Post
    If you wanna meet up somewhere near the A406 Walthamstow or somewhere i could do a code reading for ya and point you in the right direction. Yes if the spanner comes on it means its logged a code and either the faults gone now or still present but not so bad a fault as to keep the spanner on. Lemme know,

    I'm free this weekend if you wanna check.
    Yeah sure mate that would be great!!! I didnt really want to spend however much vauxhall charges to find a problem, fix it and then the light comes on again having to pay more if you know what i mean.
    I'm a bit low on cash until the 5th when I get paid. So I wont be abe to do any repairs until then. Probably invest in a code reader myself later on.

    Please pm me your number or email.

  9. #9
    Administrator plasma's Avatar
    Join Date
    Mar 2006
    Location
    On the Forum
    Post Thanks / Like
    Mentioned
    572 Post(s)
    Tagged
    1 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra

    Trim : SRi

    Engine : 150

    Year : 05

    Mileage : 74000

    Default

    pm sent mate

  10. #10
    Regular Member
    Join Date
    May 2008
    Location
    London
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Big thanks to plasma today for helping me and reading/erasing my codes!
    Diagnosed z Faulty Glow Plug and some other minor faults
    Spanner light hasnt come on this week when idle, no codes were found so i dnt know what it was.
    Replaced it today and thought i'll give it a full service too!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2.2dti spanner light at idling?
    By bigben in forum Engine & Drivetrain
    Replies: 8
    Last Post: 27th January 2010, 21:05
  2. 2.2DTI Spanner fault Light.... HELP
    By n30jjb in forum Vectra C / Signum Troubleshooting
    Replies: 2
    Last Post: 15th June 2009, 08:42
  3. 2.2dti only revs to 2600 rpm- spanner light on
    By nutty0069 in forum Engine & Drivetrain
    Replies: 5
    Last Post: 25th January 2009, 15:42
  4. Spanner light and slight loss of power 2.2dti
    By nickd_m in forum Engine & Drivetrain
    Replies: 15
    Last Post: 10th November 2008, 23:28
  5. Spanner light & ECU reset - 2002 GSi
    By gtr1000 in forum Engine & Drivetrain
    Replies: 15
    Last Post: 8th March 2008, 08:29

Visitors found this page by searching for:

vectra c 2.2 dti spanner light

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •