Help with Fuses!

[SRIstu]

Hi folks

Having a spot of trouble with my Vectra SRI 2.2 Petrol 05

Washer Jets stopped working so was told by Vauxhall to check the fuse (10A). I unfortunately don't have a manual for the car so checked all the 10A fuses and all were ok.

Problem is now the engine management and traction control warning lights are now on and the screen says 'brake switch problem'

I am sure fuses are all back correct but need a list of the position numbers to confirm

I'm concerned I've managed to do some damage here...anybody got any ideas??

Cheers

[carpet]

According to my W/D there are two fuses in the wash/wipe system. Both are located in the engine fuse box, F5 is 15amp and F22 is 30amp. All the 10amp seem to be controlling parts of the lighting circuit, a/c or ECU. This info is for 2002-05/Sept 2005-55reg. Hope this info is of some help.

[SRIstu]

Looks like I may have replaced a fuse wrongly that controls the ecu!

Any chance you've got the position numbers for all the fuses in the engine box?

[willc01]

If you go to the Reference Library here you can download all the manuals from Vx after registering

[rushy]

Hi mate, me again from over on Z22se, will have a poke around and see if I can find a list.

[900ss]

Any chance you've got the position numbers for all the fuses in the engine box?

Is it not printed on the inside of the fuse box lid?
Mine is

[SRIstu]

Hi mate, me again from over on Z22se, will have a poke around and see if I can find a list.

Hi mate...cheers much appreciated, trying to get it sorted for tomorrow...45 mile run to work!

[Big Dave]

you can download all the manuals from Vx after registering

No longer need to register.

http://www.vauxhall.co.uk/vaux/pages...uals/index.jsp

[SRIstu]

Is it not printed on the inside of the fuse box lid?
Mine is

It's just got the numbers unfortunately.

Got the info from the vauxhall website...well the 2007 manual but seems to be the same. All fuses correct so gonna try disconnecting the Battery for a bit.

[rushy]

Disconnect for at least 20 mins, have your dials ever dropped in the past?