Wiring Diagram

[Chris4122]

I have an 04 plate Vectra and am trying to fit after market fog lamps.
Does any one have a wiring diagram or know if the Vectra loom is pre-wired to accept front fog lamps?

Thanks

[Tony W]

See my post dated 26/11/08 re Haynes manual for Vx/Opel Vectra C.

Fog light wiring diagram in section Wiring diagrams (12.21... Fog Lights in diagram 4).It may have 2 x foglight wiring harnesses each terminated into a two pin socket and tied up near the front foglight grills. The wires are black(power) and brown (earth) but there's more to it than this... various threads on this topic have already been posted...good huntin'....

[Chris4122]

Thanks Tony, will have a good look round site later, am in work at min

Chris

[andy.l]

its pretty easy to fit the factory fitted ones,all you will need is the genuine
foglamps,a new light switch and the relevant harness (which has to be
made up)to run from the fusebox to each side of the bumper fog positions
then it need tech2.

none of the basic models will have the wiring in place so it has to be retro fitted


im in the middle in sorting out this such retro fit for one of the members

[mity]

Hello Chris4122

You can take a look on this link
http://www.clubopel.com/viewtopic.php?t=21256&start=0
but in first phase analyze only the pictures from that topic with 3 page.

For details you can ask me here.