Sri edition 100 traction control

**bellage** · 15th November 2008, 12:16

Not that i need to, but is it possible to switch the traction control off?

**macdad** · 15th November 2008, 12:22

[quote=bellage;732410]Not that i need to, but is it possible to switch the traction control off?[/quote

Have a look here this answer your questions..
http://forum.vectra-c.com/showthread.php?t=61894

**john_k_sri** · 15th November 2008, 12:40

Originally Posted by bellage

Not that i need to, but is it possible to switch the traction control off?

Indeed it is. I fitted a TC switch to my Edition 100, and it works!

**bellage** · 15th November 2008, 12:42

Cheers m8, i have read that and i think its best to leave it alone.

**kenp** · 15th November 2008, 16:41

ups wrong thread...

**ed taylor** · 15th November 2008, 17:11

Originally Posted by bellage

Cheers m8, i have read that and i think its best to leave it alone.

Why not try one they are not too expensive. If it does work, you have Two choices then, either to use the TC switch or Not to. I would go for it, it is a nice little mod.

and it looks good too.

**mark1319** · 15th November 2008, 17:14

It'll work on most edition 100's, yet to hear of one it didn't work from the guys who have tried it, myself included.

**john_k_sri** · 15th November 2008, 23:17

Originally Posted by mark1319

It'll work on most edition 100's, yet to hear of one it didn't work from the guys who have tried it, myself included.

All Edition 100's built in the same plant (Ellesmere Port) from Summer 2003 to Spring 2004, as were other (standard) 2.0T's in standard trims such as SXI and SRI. TC should be switchable on all of them, I would have thought.