I was just making you aware how most places work, polishes need to be worked to break the abrasives down, when I did the
red astra I wanted a perfect finish, no swirls the parts with original paint I achieved that but the ones that had fresh paint (back door) I didnt touch and the side that had a layer of clear coat the swirls were under the clear coat.
The polishes I used on a dual action polisher which takes a little longer to break them down gave me about 4-5 minutes per 1 foot square section a rotary your probably looking at about 2-3 minutes I seriously doubt for £20 you will get so much time spent on your car. Wool pads are very aggressive also and if they use them they will need to go over again with a soft foam pad to remove the marks left by the wool pad.
Bookmarks