VXR tacho in Sri question

[throdo]

Recently I found an VXR/(well OPC) tacho to replace my standard 1.8 Sri.

Apart from correcting the mileage (I have to figure out how) I noticed another issue: The Parking, IDS and Tyre pressure icons are always on.
My Sri has nothing of the above systems/sensors installed. Is there any way to deactivate these icons through Tech-2? ( If not I am thinking of "masking" them but I thought I should ask first.)

[EURO G]

unfortunatly i cant help with your question but i was thinking of putting sri clocks into my elite and was wondering is it just plug and play barr setting the mileage,on the mileage would probably hafta use on of those digital dash repair guys or so they call themselves would you not?

[steve1975l]

I would remove the LED.

[throdo]

I would remove the LED.

Yes, this would solve it (I hope there isn't a missing LED sensor )

[sig63]

Recently I found an VXR/(well OPC) tacho to replace my standard 1.8 Sri.

Apart from correcting the mileage (I have to figure out how) I noticed another issue: The Parking, IDS and Tyre pressure icons are always on.
My Sri has nothing of the above systems/sensors installed. Is there any way to deactivate these icons through Tech-2? ( If not I am thinking of "masking" them but I thought I should ask first.)

Ask Hans_Vledder: he had the same problem and the icons were deactivated via Tech2; the correct mileage was done via reprogramming the EEPROM:

http://forum.vectra-c.com/showpost.p...6&postcount=12

http://forum.vectra-c.com/showpost.p...7&postcount=13