When I turn the nob inside to adjust the headlight angle nothing happens? I mean the switch next to the headlight nob. Anybody got any ideas, I hope this makes sense?
Thanks in advance,
Robbie
When I turn the nob inside to adjust the headlight angle nothing happens? I mean the switch next to the headlight nob. Anybody got any ideas, I hope this makes sense?
Thanks in advance,
Robbie
<silly schoolboy giggle>
You said nob
</giggle>
Anyway... Do neither of the headlights move? If neither move, it's probably a duff switch or connection. If only one moves, it'll be a faulty motor.
maybe a stupid question, but did you try it while the engine was running?
neither move, engine on or off when I twist the NOB! Confused!!!
A faulty knob or electrical connection...or both motors are fried which is not likely
Had this problem on mine. Turned out both the headlight units had become detached from the adjustment motor. If you remove the rubber cover behind the headlight check if the internal unit moves. The motor can disconnect from the internal unit if too much pressure is used when changing bulbs. It is a ball and socket connection and is a bit fiddly to reconnect.
Just a thought, have you checked the fuse. Sometimes the solution is a simple one.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks