How do you remove the plastic inserts by the Fogs ??

**DeanF** · 6th August 2008, 15:43

As above

I have done a search but to no avail & i did not want to be to brutal

But how the devil do the plastic grill's come out of the bumper, The ones that are by the Front fog lights..

Don't tell me i have to remove all the belly Tray !!

Cheers

Dean

**tyreman** · 6th August 2008, 16:02

If your's is a facelift they're held on by clips and a few plastic welds,out with the dremel i'm afraid.

**Taffyopel** · 6th August 2008, 16:05

Is yours a facelift or a pre-facelift Dean?

If it's a facelift then officially you need to remove the bumper. (Easy job).

But the shortcut way is to just give them a good sharp yank as the only thing holding them in are a few plastic tabs that are melted over. Melted plastic becomes brittle so they will break easily enough.

If it's bumper off then open the bonnet, remove 4 Torx screws from above the grill, 2 in each wheel arch, and 4 plastic clips underneath and it's off.

Hope this

helps.