foglight on a vectra

[ORAC60]

Hi my name is ORAC60 a real oldie this is my first time on this site
I have a question if some one can help me please
my son s got a vectra i think its about 1998/9 and he`s busted his o/side fog light can any one tell me how to replace it and also is there any where you can get a free on line manual of PDF for this motor its a 2ltr model
ive got the spare one ready to fit
thanks ORAC60

[m8internet]

If it's a 1998/1999 MY (Model Year), then that will be a Vectra B probably on a S, T, V, or X reg
To access the foglight bulb in the Vectra B, this is done from under the front bumper, it is best done by raising the front of the car slightly
I did this by mounting the entire relevant front tyre on a high kerb, giving the required access room to gain access
There is a grey access panel, unclip this
The bulb can then be removed and unclipped

If the car is indeed a Vectra C, then on most models it is necessary to also remove the under bumper protection tray
Access is then similar as above

[ORAC60]

many thanks will try it later its a bit wet outside
ORAC60

[ion]

Welcome mate, enjoy the site!

[glenboy]

[Jay Kay 313]

and enjoy

[KeefyJ]

Just dropped my second Vectra B and the front fogs can be a bit of a difficult replace - good luck with it!

[ORAC60]

rain stopped and we got job done
a bit hard to do but we got there

many thanks to you all hope i can help you out one day just ask:pipe:
ORAC60: