Piston Wind-Back Tool...

[Rebellion]

Can anyone who has the piston-winding tool for the rear brakes, let me know please what the distance is between the two lugs that fit into the holes in the piston face? Preferably the distance from the centre of one lug to the centre of the other one, to give it more accuracy. Much appreciated.

[ed taylor]

Mine looks about 21 m/m. I have not used it yet but hope it will be the correct centre,s.

[Rebellion]

Mine looks about 21 m/m. I have not used it yet but hope it will be the correct centre,s.

Then we might both have the wrong ones...lol

Anyone with a proven one able to help? Ta

[shunter]

The one I've got is 20mm...

[macdad]

Mines 20mm as well fits snugly into the holes in the caliper.

[Rebellion]

Thanks lads.

[parapaul]

The one I've got is 20mm...

Not being deliberately thick, but how on earth do you read 20mm on that scale? 20mm seems to be a random point inside the 'window'!

[shunter]

It's not very clear in the picture, but there's marks on the oval "window", along the bottom. You can just make out the line under the 2.

[Gsi3.2]

there's a tiny nick to give a point in the lower frame of the window, partially obscurred by the camera flash

[shunter]

There you go...