What parts would be needed to change the standard vx HU to a single din pioneer HU?
Would be nice if the stalk controls and display still work
What parts would be needed to change the standard vx HU to a single din pioneer HU?
Would be nice if the stalk controls and display still work
Just put one in mine mate.
Need a single din facia adapter £10, cage £? and the relevent remote control adapter which retail from about £30.
Oh and probably an aerial connection adapter for the radio.
thanks for the reply
do i need to get one of these:
http://www.caraudiodirect.co.uk/2960...897a8d5dc80c86
or one of these:
http://www.caraudiodirect.co.uk/ctsv...897a8d5dc80c86
Depends on what car you have - half canbus or full canbus.
If you have the 3 buttoms on your steering wheel either side it should be half and if you have the wheel to control the volume etc then its full.
Mines an 02 plate so only half canbus. Picked up my adapter from car audio security
mines a 05 with wheels on both sides of the steering wheel, so must be full canbus
single din adaptor and harness avv from vx for about £35.00, get the harness for your head unit to opperate the steering wheel control's from halford's or any good audio shop
hth
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks