cant for the life of me find the how 2 , to fit the sidelights.. need the pics 2 see which part of the light needs to come off...and which bits to twist/untwist etc... help please..
cant for the life of me find the how 2 , to fit the sidelights.. need the pics 2 see which part of the light needs to come off...and which bits to twist/untwist etc... help please..
got no pictures mate but i took the air box out twist the big black caps on the back of the lights .the side lights are a right pain in the a$$ try and use a pair of long nose pliers
If its a face lift the side lights pull straight out. No need to take the air box off.
You will need to take the rear plastic light cover off. This is a short turn anticlockwise.
I did both lights in 10 minutes total.
Not sure whats involved if its a pre-facelift.
never mind..i was pulling at the wrong bit!!
and yep..i have fat fingers too and sttill managed without the airbox off.. i knew it was behind the covers but ended up tryin to unclip the wrong section.. all sorted now... cheers!!
pics are here... mtec and bluevision sidelights...
http://forum.vectra-c.com/showthread.php?t=37678&page=4
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks