how do i take the steering wheel off a vectra 52 plate sri without any damage to the airbag and what tools ??
how do i take the steering wheel off a vectra 52 plate sri without any damage to the airbag and what tools ??
with great care.............
I am sure someone with a sensible answer will be along shortly
Disconnect battery, leave airbag to discharge for a while...
Pop it off using 2 holes at the bock of the steering wheel and poking a small thin screwdriver up there - it's two sprung clips that you just need to move inwards and then gently pull that side of the airbag off...
disconnect wires to airbag and sterring wheel controls...
Get huge Torx socket (male) and screw off...
15 minutes tops
It really is easy when you know how.
The torx bit you need is a T50 aswell.
I only know because I've done it three times so far messing about with my VXR sterring wheel...
And will have to do it again soon for it's MoT as the horn doesn't work as it's a different connector....
Its just to change the cim and am a bit scared lol
As long as the battery's disconnected and you don't chuck the airbag about you'll be fine mate.
I was 5hitting myself the first time I took it off.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks