you signum owners

[andy.l]

any of you signum owners have factory fitted parking pilot system
if so were in the car is the buzzer speaker situated and if you can
take a piccy in were it is.

your kind replies is much appreciated



cheers

[dave45040]

Hiya,

I have front and rear factory fitted parking sensors on my Siggy.

No pics I am sorry but I believe that the front signal comes from behind the dash and the rear is located somewhere in the roof lining - am sure someone else will correct me and / or give more specific locations fairly soon.

I know that on my last Siggy which also had them fitted the rear buzzer was fairly quiet (especially noticeable when radio on) so my local dealers were able to increase the volume on it.

Sorry can't be more help.

[Duncan]

As Dave said, the front sensors beep from the CIM module, the rears from a speaker in the roof lining.

[leeds vectra]

You will be the first to retro fit the fronts Andy, I've only done the rear.

New bumper
Two wiring harnesses
Four sensors
Park pilot ECU

Might as well do the rear whilst your at it.

[andy.l]

cheers fo all ya info


dave45040


have you got a piccy of tha sensors on ya bumper as according to epc they
list 2 different sensors but only 1 for facelift chassis change but i have seen
the sensors being the round factory ones so if i see a piccy of yours then it
be sorted so if you can take a piccy of the front of ya bumper it be
appreciated.

cheers

[signumart1]

You will be the first to retro fit the fronts Andy, I've only done the rear.

New bumper
Two wiring harnesses
Four sensors
Park pilot ECU

Might as well do the rear whilst your at it.

Wow, how much did that lot cost? Did you really need a new bumper, I assumed it would be a few holes drilled in the right places like I did with my mail order kit.

[andy.l]

Wow, how much did that lot cost? Did you really need a new bumper, I assumed it would be a few holes drilled in the right places like I did with my mail order kit.

nah i dont need to buy and replace the front and rear bumpers as you can
just drill the bumpers and fit the sensors but its wot im like its just me i`m
so fussy in wot i do and upto now in wot i ave done to me signum i have
and do fit the genuine article as if its been factory fitted.

[sig63]

is this one ok?

[andy.l]

fantastic sig63 much appreciated many thanks