guys what are all the wires for ?
i've just bought myself the facia kit and the harness but can't work out what all the wires are for see below[IMG][/IMG]
any help will be great
liam
guys what are all the wires for ?
i've just bought myself the facia kit and the harness but can't work out what all the wires are for see below[IMG][/IMG]
any help will be great
liam
The wires in the harness are the permanent live and switched live.
You need to look at your headunits harness to see where the switched live and perm live connect.
You can then place the cables into the ISO connector.
Some aftermarket headunits allow you switch round the perm and switched live using bullets. The VX cabling is the alternative.
it was more the cables with the question mark by them i was trying to find out what they are for - the bottom set are the power and speaker cables but what are the top ones ?
the bottom one is power only
one of the top ones will be the speaker connector.......
the third one....good question.....
[B][SIZE=3]also does anyone know what areas the colours on the speaker cable represent front right, rear left etc etc
The cable colours may be different but this shows the pinout for a standard ISO DIN speaker connector...
Where do I connect the power lead? does it have to run to the battery? Its a pioneer head unit if this helpsOriginally Posted by philzi
I just did mine mate, i live in irvine. PM me if you need any help.
Billy
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks